BenQ MP611 - Appearance Inspection Specification

60
5.3.13.2. APPEARANCE INSPECTION SPECIFICATION:
Judge criterion
Judge area
Judge item Inspection specification
Major
Minor
Spot, Scratch,
Gap,
○ A/B/C side
Color variance
Refer to Part I 1.Appearance Inspection Criteria
○
Broken ○
Deformed ○
Print mistake ○
Carton
Cushion
damaged
No allow
○
No label ○
Invert label ○
Broken
No allow
○
Dirt ○
Not clear ○
Word out of
shape
Word can be read.
○
Mistake No allow ○
Label
Position Be attached on right position ○
Solder Appearance Can’t see the abnormal color, shape, hurt, dirt
(fused goods, etc.). If it is necessary, please
prepare sample.
○
Missing No ○
Loose No ○
Screw
Screw stripe
damaged
Can be screwed up ○