BenQ MP611 - Power Supply Specification; Input Power Specification; Output Power Requirement; Lamp Power Specifications

41
Appendix F Power Supply Specification
1. Input Power Specification
Specification Description
Input Voltage Range The unit shall meet all the operating requirements with the range 100
~ 240 VAC
Frequency Range The unit shall meet all the operating requirements with an input
frequency range 50 Hz ~ 60 Hz
Power Consumption Normal operation: 285 W (Max)
standby mode: < 5W
Regulation Efficiency 80 % (typical) measuring at 115Vac and full load
2. Output Power Requirement
The power supply can provide DC output as below：
NO. Voltage Regulation Load Current Range Ripple & Noise
1
+5 V
±5 %
0.06A ~ 2 A 100 mV
2 +2.5 V
±5 %
0.3 A ~ 2 A 100 mV
3 +12 V
±10 %
0.04 A ~ 1A 300 mV
3. Lamp Power specifications
Specification Description
Applicable Lamp 200W, AC operation
Starting pulse from Ignitor Pulse voltage 7KV max.