Big Backyard F23073C - Page 61

 61  support@solowavedesign.com
HardwareWood Parts
C:Frominsidethefortmeasure13”upfromthebottomof(2154)FrontPostattach(2107)DoorStopto(2154)
FrontPostand(2135)WallSupportwith3(S15)#8x1-3/4”WoodScrews.(g.24.5,24.6and24.7)
D:Inthenotchedoutopeningof(2107)DoorStopattachtheMagneticCatchusing2(S18)#6x1”WoodScrews.
(g.24.6)Important: Use a hand held screw driver and DO NOT over tighten.
3 x #8 x 1-3/4” Wood Screw
2 x #6 x 1” Wood Screw
S15
1 x Door Stop 5/4 x 4 x 10”
2107
Fig. 24.6
Fig. 24.5
Other Parts
1 x Magnetic Catch
S18
Step 24: Door Wall Assembly
Part 3
Inside View
2154
Outside View
S15
13”
MagneticCatch
S18
2107
2135
Fig. 24.7
Note: Door Stop should over hang
1-1/4” in the opening.