Binder BF 56 - Page 3

BD / BF / ED / FD / FED (E3.1) 02/2022 page 3/116
7.3
Setting the safety controller set-point ................................................................................................ 38
7.4 Alarm message and proceeding in case of an alarm ........................................................................ 39
7.5 Function check .................................................................................................................................. 39
7.6 Disconnectable audible over-temperature alarm (option) ................................................................. 40
8. TIMER FUNCTIONS ............................................................................................. 41
8.1 Selecting the timer function ............................................................................................................... 41
8.2 Timer function “Delayed Off” ............................................................................................................. 42
8.2.1 Entry and activation of the timer run-time and fan setting ....................................................... 42
8.2.2 Turning off the timer function or changing the settings ........................................................... 44
8.3 Timer function “Temperature dependent Delayed Off” (BF, FED) .................................................... 46
8.3.1 Entry and activation of the timer run-time, fan setting and set-point entry .............................. 46
8.3.2 Turning off the timer function or changing the settings ........................................................... 48
8.4 Timer function “Delayed On” (BF, FED) ............................................................................................ 49
8.4.1 Entry and activation of the timer run-time and fan setting ....................................................... 49
8.4.2 Changing the settings .............................................................................................................. 51
8.5 Temperature programming example (BF, FED) ............................................................................... 51
9. RAMP FUNCTION ................................................................................................ 52
9.1 General information ........................................................................................................................... 52
9.2 Setting and displaying the ramp function .......................................................................................... 53
9.3 Displaying the effective ramp set-point and changing the target ramp set-point .............................. 54
9.4 Turning off the ramp function ............................................................................................................ 55
10. DATA RECORDING VIA USB INTERFACE ........................................................ 56
10.1 Starting data recording ...................................................................................................................... 56
10.2 Terminating data recording ............................................................................................................... 57
11. NETWORK CONFIGURATION FOR CHAMBERS WITH ETHERNET
INTERFACE ......................................................................................................... 58
12. OPTIONS .............................................................................................................. 61
12.1 APT-COM™ 4 Multi Management Software (option) ........................................................................ 61
12.2 Object temperature display with additional Pt100 temperature sensor (option) ............................... 61
12.3 Analog output for temperature (option) ............................................................................................. 61
12.4 HEPA fresh air filter (option for FD, FED) ......................................................................................... 61
12.5 Water protected disconnectable internal socket (option BD, BF) ..................................................... 62
12.6 Mostly gas-tight version (option for BF, FD, FED) ............................................................................ 62
12.7 Inert gas connection with mostly gas-tight version (option for BF, FD, FED) ................................... 63
13. CLEANING AND DECONTAMINATION .............................................................. 65
13.1 Cleaning ............................................................................................................................................ 65
13.2 Decontamination / chemical disinfection ........................................................................................... 67
14. MAINTENANCE AND SERVICE, TROUBLESHOOTING, REPAIR, TESTING ... 68
14.1 General information, personnel qualification..................................................................................... 68
14.2 Maintenance intervals, service .......................................................................................................... 68
14.3 Simple troubleshooting ...................................................................................................................... 69
14.4 Sending the chamber back to BINDER GmbH ................................................................................. 70
15. DISPOSAL............................................................................................................ 71
15.1 Disposal of the transport packing ...................................................................................................... 71
15.2 Decommissioning .............................................................................................................................. 71
15.3 Disposal of the chamber in the Federal Republic of Germany ......................................................... 71
15.4 Disposal of the chamber in the member states of the EU except for the Federal Republic of Germany
.......................................................................................................................................................... 72
15.5 Disposal of the chamber in non-member states of the EU ............................................................... 73
16. TECHNICAL DESCRIPTION ................................................................................ 74
16.1 Factory calibration and adjustment ................................................................................................... 74
16.2 Definition of usable volume ............................................................................................................... 74