Binder BF 56 - Timer function “Temperature dependent Delayed Off” (BF, FED)

BD / BF / ED / FD / FED (E3.1) 02/2022 page 46/116
8.3 Timer function “Temperature dependent Delayed Off” (BF, FED)
8.3.1 Entry and activation of the timer run-time, fan setting and set-point entry
From Normal display
3 x
with the arrow-down button to the Timer function “Temperature dependent
Delayed Off” menu
(with connected USB device: press the arrow-down button 4 times)
Current Timer function “Temperature dependent Delayed Off”
Confirm with OK and go on to enter the days of the timer run-time.
The current timer run-time (days) is shown. The day value flashes.
Enter the days of the timer run-time (0 up to 9)
confirm with OK
and go on to enter the hours of the timer run-time
The hour value flashes.
Enter the hours of the timer run-time (0 up to 23)
confirm with OK
and go on to enter the minutes of the timer run-time
The minute value flashes.
Enter the minutes of the timer run-time (0 up to 59)
confirm with OK
and go on to enter the temperature set-point