BD / BF / ED / FD / FED (E3.1) 02/2022 page 49/116
8.4 Timer function “Delayed On” (BF, FED)
8.4.1 Entry and activation of the timer run-time and fan setting
From Normal display
2 x
with the arrow-down button to the Timer function “Delayed On” menu
(with connected USB device: press the arrow-down button 3 times)
Current timer function “Delayed On”
Confirm with OK and go on to enter the fan speed set-point valid during the
time the timer is running
The current fan speed set-point is shown
Enter the fan speed in steps of 10 %
0 % and 40 % up to 100 %
Confirm with OK and go on to enter the days of the timer run-time.
The current timer run-time (days) is shown. The day value flashes.
Enter the days of the timer run-time (0 up to 9)
confirm with OK
and go on to enter the hours of the timer run-time
The hour value flashes.
Enter the hours of the timer run-time (0 up to 23),
confirm with OK
and go on to enter the minutes of the timer run-time
To Next Page
Loading...
