BD / BF / ED / FD / FED (E3.1) 02/2022 page 84/116
Rack, chrome-plated or stainless steel
Perforated rack, stainless steel
Heavy load rack, stainless steel
Access ports with various diameters, with silicone plug
Communication interface Ethernet
Battery backed real-time clock
Rubber pads for safe stacking (5 pieces)
Object temperature display with additional Pt100 temperature
sensor
√ √ √ √ √
Disconnectable water protected internal socket (CA3GD) for
line voltage inside the chamber, IP type of protection 67, 230
V 1N ~ 50-60 Hz. Max. load 500 W
√ √
Analog output 4-20 mA for temperature with 6 pole DIN
socket, DIN plug included
√ √ √ √ √
HEPA Fresh air filter, class H 14 (DIN EN 1822:2009)
Inert gas connection (gas inlet and outlet), with mostly gas-
tight version
√ √ √
Disconnectable audible over-temperature alarm
FKM door gasket (temperature resistant up to 200 °C / 392 °F
max.)
√ √ √
Measurement of air change rate acc. to ASTM D5374
Factory calibration certificate
Extension to factory calibration certificate (additional values)
Measuring protocol acc. to DIN 12880:2007
Neutral cleaning agent (liquid concentrate)
Stable table on wheels with castors and locking brakes
16.10 Accessories and spare parts (extract)
BINDER GmbH is responsible for the safety features of the chamber only, provided skilled
electricians or qualified personnel authorized by BINDER perform all maintenance and repair,
and if components relating to chamber safety are replaced in the event of failure with original
spare parts. The user is responsible for any risks arising from using unauthorized accesso-
ries/components.
Rack, chrome-plated BD, ED
Rack, chrome-plated BF, FD, FED
Rack, stainless steel BD, ED
Rack, stainless steel BF, FD, FED
Perforated rack, stainless steel BD, ED
Perforated rack, stainless steel BF, FD, FED
Rack, heavy load, stainless steel BD, ED
Rack, heavy load, stainless steel BF, FD, FED