Binder BF 56 - Page 89

To Next Page

To Previous Page

BD / BF / ED / FD / FED (E3.1) 02/2022 page 89/116

Main Page

Table of Contents2
Safety5
Personnel Qualification5
Operating Manual5
Legal Considerations5
Intellectual Property6
Structure of the Safety Instructions6
Signal Word Panel6
Safety Alert Symbol7
Pictograms7
Word Message Panel Structure8
Localization / Position of Safety Labels on the Chamber8
Type Plate9
General Safety Instructions on Installing and Operating the Chambers10
Intended Use12
Foreseeable Misuse13
Residual Risks14
Chamber Description15
Chamber Overview16
Triangular Instrument Panel17
Main Power Switch ED, FD, FED 72017
Completeness of Delivery, Transportation, Storage, and Installation18
Unpacking, and Checking Equipment and Completeness of Delivery18
Guidelines for Safe Lifting and Transportation18
Storage19
Location of Installation and Ambient Conditions19
Installation21
Mounting the Tilt Protection Holders (Chambers with Window)21
Electrical Connection22
Connection to an Exhaust/Ventilation System (Optional)24
Inserting the Racks24
Start up25
Behavior When Opening the Door25
Performance During and after Power Failures25
Loading25
Overview and General Settings on the R4 Controller26
Controller Overview26
Normal Display26
Setting the Menu Language27
Setting Date and Time28
Selecting the Temperature Unit30
Set-Point Entry for Temperature and Fan Speed31
Set-Point Entry for Temperature in Two-Door Chambers (ED, FD, FED 720)32
Adjusting the Air Flap Position33
Changing the Passwords for User Level and General Controller Functions34
Overtemperature Protection36
Overtemperature Protective Device (Class 1)36
Safety Controller37
Setting the Safety Controller Set-Point38
Alarm Message and Proceeding in Case of an Alarm39
Function Check39
Disconnectable Audible Over-Temperature Alarm (Option)40
Timer Functions41
Selecting the Timer Function41
Timer Function "Delayed off42
Entry and Activation of the Timer Run-Time and Fan Setting42
Turning off the Timer Function or Changing the Settings44
Timer Function "Temperature Dependent Delayed Off" (BF, FED)46
Entry and Activation of the Timer Run-Time, Fan Setting and Set-Point Entry46
Turning off the Timer Function or Changing the Settings48
Timer Function "Delayed On" (BF, FED)49
Entry and Activation of the Timer Run-Time and Fan Setting49
Changing the Settings51
Temperature Programming Example (BF, FED)51
Ramp Function52
General Information52
Setting and Displaying the Ramp Function53
Displaying the Effective Ramp Set-Point and Changing the Target Ramp Set-Point54
Turning off the Ramp Function55
Data Recording Via Usb Interface56
Starting Data Recording56
Terminating Data Recording57
Network Configuration for Chambers with Ethernet Interface58
Options61
APT-COM™ 4 Multi Management Software (Option)61
Object Temperature Display with Additional Pt100 Temperature Sensor (Option)61
Analog Output for Temperature (Option)61
HEPA Fresh Air Filter (Option for FD, FED)61
Water Protected Disconnectable Internal Socket (Option BD, BF)62
Mostly Gas-Tight Version (Option for BF, FD, FED)62
Inert Gas Connection with Mostly Gas-Tight Version (Option for BF, FD, FED)63
Cleaning and Decontamination65
Cleaning65
Decontamination / Chemical Disinfection67
Maintenance and Service, Troubleshooting, Repair, Testing68
General Information, Personnel Qualification68
Maintenance Intervals, Service68
Simple Troubleshooting69
Sending the Chamber Back to BINDER Gmbh70
Disposal71
Disposal of the Transport Packing71
Decommissioning71
Disposal of the Chamber in the Federal Republic of Germany71
Disposal of the Chamber in the Member States of the EU Except for the Federal Republic of Germany72
Disposal of the Chamber in Non-Member States of the EU73
Technical Description74
Factory Calibration and Adjustment74
Definition of Usable Volume74
Over Current Protection74
BD Technical Data75
BF Technical Data76
ED Technical Data78
FD Technical Data80
FED Technical Data81
Equipment and Options (Extract)83
Accessories and Spare Parts (Extract)84
Dimensions Size 5686
Dimensions Size 11588
Dimensions Size 26090
Dimensions Size 72092
Certificates and Declarations of Conformity95
EU Declaration of Conformity for BD95
EU Declaration of Conformity for BF97
EU Declaration of Conformity for ED99
EU Declaration of Conformity for FD101
EU Declaration of Conformity for FED103
Certification Institute of the Association for Electrical, Electronic and Information Technologies)105
Certificate of Compliance for the UL Certification Mark from Underwriters Laboratories110
Contamination Clearance Certificate111
For Chambers Located Outside the USA and Canada111
For Chambers Located in the USA and Canada114

Binder BF 56 - Page 89

Table of Contents

Other manuals for Binder BF 56

Related product manuals