KT (E6.1) 07/2015 Page 126/138
Different electrical data for KT-UL constructed for the USA and Canada
(model versions KT053UL-120V, KT115UL-120V, KT170UL-120V)
Nominal voltage
(+/-10%)
Unit fuse 5x20 mm 230V / middle-time-lag M
Additional temperature fuse
class 1 (DIN 12880) internal
Noise level (mean value.)
*** Values not yet determined
All technical data is specified for unloaded units with standard equipment at an ambient temperature of
+25 °C / 77°F and a power supply voltage fluctuation of +/-10%. Technical data is determined in
accordance to BINDER Factory Standard Part 2:2015 and DIN 12880:2007 and refers to 100% fan
speed.
All indications are average values, typical for units produced in series. We reserve the right to
change technical specifications at any time.
23.5 Equipment and Options
To operate the refrigerated incubator, use only original BINDER accessories or accessories /
components from third-party suppliers authorized by BINDER. The user is responsible for any
risk arising from using unauthorized accessories.
Multifunction program controller T4.12 with digital display
Overtemperature safety controller class 3.1 acc. to DIN 12880:2007
Peltier refrigerating system
Additional shelf, stainless steel
Perforated shelf ,stainless steel
Perforated rack with additional fixation for shaker operation
Reinforced rack stainless steel with 1 set of rack lockings
Safety controller class 3.3 acc. to DIN 12880:2007
Additional access ports 30 mm / 1.18 in, 50 mm / 1.97 in or 100 mm / 3.94 in, with silicone plug
Communication interface RS 422
Zero-voltage relay alarm output with DIN socket (6 poles), DIN plug included
Analog output temperature 4-20mA with DIN socket (6 poles), DIN plug included
Zero-voltage relay control outputs via operation lines output to DIN socket (6 poles), DIN plug included