KT (E6.1) 07/2015 Page 64/138
10.2 Cancelling a running week program
To cancel a week program, go to Menu > Programs > Week program > Stop.
To cancel a running week program, you can also go to Quick menu > Week program > Stop.
The controller returns to the initial view.
Performance after manual program stop
The controller automatically changes to the “Fixed value” operation mode.
Before starting a program, check the temperature setpoint entered in the “Fixed value” operation mode.
After cancelling the program, the temperature will equilibrate to this value.
Too high or too low temperature after cancelling the program.
Damage to the charging material.
Check the temperature setpoint of “Fixed value” operation and if necessary adapt it.
To Next Page
Loading...
