Binder KT 53 - Completeness of Delivery, Transportation, Storage, and Location of Installation; Unpacking, and Checking Equipment and Completeness of Delivery; Guidelines for Safe Lifting and Transportation

KT (E6.1) 07/2015 Page 17/138
3. Completeness of delivery, transportation, storage, and location
of installation
3.1 Unpacking, and checking equipment and completeness of delivery
After unpacking, please check the unit and its optional accessories, if any, based on the delivery receipt
for completeness and for transportation damage. Inform the carrier immediately if transportation damage
has occurred.
The final tests of the manufacturer may have caused traces of the shelves on the inner surfaces. This has
no impact on the function and performance of the unit.
Please remove any transportation protection devices and adhesives in/on the unit and on the doors and
remove the operating manuals and accessory equipment.
CAUTION
Sliding or tilting of the unit.
Damage to the unit.
Risk of injury by lifting heavy loads.
 Do NOT lift or transport the unit using the door or the door handle.
 Lift the unit from the pallet at the four lower corners with the aid of four people.
 Lift units size 53 a
nd 115 from the pallet with the aid of four people in the area of all
4 unit feet.
 Lift units size 170 from the pallet with the aid of six people in the area of all 4 unit feet.
If you need to return the unit, please use the original packing and observe the guidelines for safe lifting
and transportation (chap. 3.2).
For disposal of the transport packing, see chap. 21.1.
Note on second-hand units (Ex-Demo-Units):
Second-hand units are units that were used for a short time for tests or exhibitions. They are thoroughly
tested before resale. BINDER ensures that the chamber is technically sound and will work flawlessly.
Second-hand units are marked with a sticker on the unit door. Please remove the sticker before
commissioning the unit.
3.2 Guidelines for safe lifting and transportation
After operation, please observe the guidelines for temporary decommissioning (chap. 21.2).
CAUTION
Sliding or tilting of the unit.
Damage to the unit.
Risk of injury by lifting heavy loads.
 Transport the unit in its original packaging only.
 For moving or shipping, secure the unit with transport straps.
 Do NOT lift or transport the unit using the door or the door handle.
 Lift the unit size 53 and 115 at the four lower corners with the aid of 4 people and
place it on a rolling pallet.
 Lift the unit size 170 at the four lower corners with the aid of 4 people and place it on a
rolling pallet.