Binder KT 53 - Turning on; off the Optional Interior Socket

KT (E6.1) 07/2015 Page 31/138
Setting the offset value:
Fixed value
08.03.2013 05:05:06
Entry menu „Offset“.
Select each number with the operating button and
press the operating button to confirm.
Setting range: 0 °C up to 5 °C.
Press the “Ok” button to confirm.
..\ Door heating \ Offset
1
.
5 [°C]
0
Ins Pos1 End Ok
1 2 3 4 5 6 7 8 9 ,
Close Ok Home
Go back to the initial view with “Home”.
This symbol on the controller display indicates that the door heating is active.
7.2 Turning on / off the optional interior socket
For chambers equipped with the water-protected interior socket (option, chap. 19.8) you can turn on and
off the voltage of the interior socket via the controller.
To access the setting menu, go to Menu > Optional equipment > Interior socket
Fixed value
08.03.2013 05:05:06
Submenu “Interior socket”.
The current setting is indicated.
To change the setting,
press the operating button.
The modified setting is displayed.
“Interior socket: Off” = socket voltage-free
“Interior socket: On” = socket with activated voltage
..\ Interior socket
Interior socket: Off
Close Home
Go back to the initial view with “Home”.
This symbol on the controller display indicates that the interior socket is activated.