Binder KT 53 - Switching on or off the Optional Object Temperature Display

KT (E6.1) 07/2015 Page 33/138
7.5 Switching on or off the optional object temperature display
For units equipped with the digital object temperature display with a flexible Pt 100 temperature sensor
(option, chap. 19.4), you can switch on or off the object temperature indication via the controller.
To access the setting menu, go to Menu > Optional equipment > Object temperature display
Fixed value
08.03.2013 05:05:06
Submenu “Object temperature display”.
The current setting is indicated.
To change the setting,
press the operating button.
The modified setting is displayed.
“Object temperature display: Off” = Object
temperature display deactivated
„Object temperature display: On“ = Object
temperature display activated
..\ Object temperature display
Object temperature display: Off
Close Home
Go back to the initial view with “Home”.