Binder KT 53 - Time Programs

KT (E6.1) 07/2015 Page 38/138
9. Time programs
The T4.12 program controller permits programming temperature cycles. It offers 52 program memory
positions with up to 100 program sections each.
To access the menu selection for time programs, select Menu > Programs > Time program
Fixed value
08.03.2013 05:05:06
Initial view.
Press the “Menu” button.
Setpoint
Actual value
Temperature [°C]
25.0
25.2
Fan [%]
100.0
User Quick menu
Menu
Fixed value
08.03.2013 05:05:06
General menu.
Select “Programs”
and press the operating button
..\ Menu
Controller mode
Event list
Alarms
Setpoints
Safety controller
Programs
Import/Export
Settings
Close Home
Fixed value
08.03.2013 05:05:06
Submenu “Programs”.
Select “Time Program”
and press the operating button
..\ Programs
Time program
Week program
Close Home