66
To create your own RTP Protocol with a new patient:
1. Click Protocol Based Activity on the Home screen.
2. Select New Activity: New Patient.
3. Enter all necessary New Patient information and click the Next icon.
4. Select Knee for the Joint.
5. Select Extension/Flexion, Bilateral, and Isokinetic or Isometric.
6. All of the built-in RTP protocols will display (select one).
7. Click the Next icon.
8. Set the ROM.
NOTE: Always start with the Uninvolved side.
9. Perform the test.
10. Select the Next icon and prepare the activity for the next knee by switching to the knee
attachment for the opposite knee.
11. Set the ROM.
12. Perform the test.
13. Select the Results icon to view the test results.
14. Select Return to Play under Select Report.
15. Click the Report icon. The RTP Report will display.
To Next Page
Loading...
