CT-600-2 15
6 Mounting
This section describes the transport, storage and mechanical installation of the components, mainly the ACP
LINK panel and IO-module (M172) in the electrical panel.
6.1 Transport and storage
The ACP LINK panel is delivered mounted on a separate frame. The HMI panel enclosure is of IP-Class
IP54 and must be stored accordingly. During transport, the ACP LINK panel and frame are transported
horizontally on the unit, the cable connection terminals are disconnected and must be assembled after
placement of the unit (see section 7).
6.2 ACP LINK panel mounting
The ACP LINK panel is attached to a separate frame with four 8mm bolts. The panel is prepared with M8
threaded holes in each corner.
The frame with the ACP LINK panel must be placed close to the ACP unit. The panel may not obstruct
access to the ACP unit. The predefined clamp-on attachment in the bottom of the panel is ready for the click-
on flange with the cables already installed on the ACP unit. The connection may need to be established after
placement of the unit and the ACP LINK panel. Connection to the plant and electrical panel must be fitted by
the customer (see section 7.1).
6.3 Electrical panel IO-module (M172) mounting
The electrical panel IO-module (M172) is shipped loose on systems where the starter panel is supplied by
the customer. The module M172 must be installed in the electrical panel and connected on-site (see section
7.2).
The M172 PLC is prepared for a DIN-rail attachment and must be placed with proper distance to the motor
cables etc. in the control voltage section of the electrical panel. Mounting instructions are supplied with the
module. See section 4.2 and section 11.1 for more information on technical data and I/O’s.
6.4 Economizer system module (CM-IO) mounting (optional)
The economizer system is shipped loose and must be installed and connected on-site. The module itself is
mounted to the support frame of the economizer system. The connection to the ACP LINK panel must be
fitted by the customer (see section 7.4).
To Next Page
Loading...