Bitzer ACP Link - Oil Separator and Economizer System Module (CM-IO); Additional Motor Connection Box

CT-600-2 9
4.4 Oil separator and economizer system module (CM-IO)
See ST-150 for technical data on CM-IO module (same as for CM-SW).
The oil separator module is mounted on the oil separator and is pre-wired from the factory.
The economizer system module is mounted on the economizer system and is partly pre-wired
from the factory.
Supplier BITZER
Reference No. OAHC65051A: 34738701
OAHC80051A: 34738702
OAHC100051A: 34738703
ECO SYS: 34738704
Description See ST-150 for technical data on CM-SW module.
Relays for heaters
(OAHC)
2 pcs 1 W, 12 A, 230 Vac (Schrack RT424730)
2 pcs 1 W, 120 Vac (Schrack RT424615)
Relay for level control
release (ECO)
1 pcs 1 W, 12 A, 230 Vac (Schrack RT424730)
1 pcs 1 W, 120 Vac (Schrack RT424615)
Resistor for level control
release (ECO)
1 pcs 69.0 kΩ
4.5 Additional motor connection box
The additional motor connection box is fixed to the
main connection box on the motor. The connections
to the compressor module are pre-wired from the factory.
Supplier WEG
Reference No. Box for frame size W22 200: WEG 14859061
Box for frame size W22 225 up to 315SM: WEG 14509565
Box for frame size W22 315L: WEG 14509566
Box for frame size W22 355: WEG 14509608
Box for frame size W50 355 and 400: 14859065
Description Motor box for connection to compressor module (CM-SW)
Cable gland M20 (WEG 12008911)
IP class IP 67
Phase output 3 phases
Fuse holder WEG 14281692
Fuse 10x38 FF 690 Vac 1A (Mercen)
Current output
Current transformers:
0 .. 1 A, Bridge current transformer: 1 Ω resistance, 3W CPF3
Type 200A/1A