CT-600-2 79
No. Function Description Related
alarms,
warnings
(see 14.1)
Related
param.
(see 13.1)
Related
timers
(see 13.2)
4.2 Alarm handler Alarm status is set and reset by
protection function and acknowledged
by alarm handler. Alarm can only be
acknowledged if status is reset. Most
alarms will reset automatically. Few
alarms (from CM-SW-01) will always
require manual reset or power cycle. A
certain number of repeated same
alarms in a certain time frame will force
manual reset.
"all" 5-7
4.3 Timer handler Timer status is set and reset by the
protection and control functions. Timers
count down in seconds.
"all"
To Next Page
Loading...