Blackmagicdesign Smart Remote 4 - Page 5

Contents
White Level Master 30
Black Level Master 30
Contrast Master 30
Saturation Master 30
Advanced Contrast Crossover Master 31
Fade Control 31
Color Correcting Black and
White Levels 31
Adjusting Color Contrast
and Saturation 31
Color Reset 31
Source Freeze Button 31
Additional Background Settings 32
Background Filter 32
Background Gradient 32
Test Signal 32
Additional Layer Settings 32
Test Signal 32
Layer Input 32
Layer Input Realistic/Linear/Additive 32
Matte Input Settings 33
Background Matte 33
Garbage Matte 33
Holdout Matte 33
Layer Matte 33
Window 33
Transition Rate 34
Setting the Layer Order 34
Configure Settings 35
Inputs 35
Outputs 35
On Air Settings 37
Setting Up a GPI Event List 39
GPIO Pinout 40
Monitor Out Settings 40
Monitor Setting Buttons 40
Saving and Loading Preset Files 43
Customizing the Menus 45
Updating the Internal Software 46
Updating your Smart Remote 4 46
Uninstalling Ultimatte SR4 v1.0.5 47
Developer Information 52
Controlling Ultimatte using Telnet 52
Blackmagic Ultimatte 12 Ethernet Protocol 53
Help 64
Regulatory Notices and
SafetyInformation 65
Warranty 66