Need help?Do you have a question about the Blackmagicdesign Studio Camera and is the answer not in the manual?
General| Power | 12V DC |
|---|---|
| Frame Rates | 23.98, 24, 25, 29.97, 30 |
| Audio Input | 2 x XLR |
| Video Output | HDMI, 6G-SDI, 3G-SDI |
| Power Input | 12V DC |
| Connections | XLR |
Instructions for attaching and removing lenses on Blackmagic Studio and Micro Studio cameras.
Steps to power on and off Blackmagic Studio and Micro Studio cameras.
Connecting Blackmagic Studio cameras to an ATEM switcher via SDI for remote control.
Controlling camera settings like color correction and focus via ATEM Software Control.
Details of the front and left panel features of the Blackmagic Studio Camera.
Overview of the front panel components and tally light on the Micro Studio Camera 4K.
Details of the left panel connections for the Micro Studio Camera 4K, including HDMI and Expansion Port.
Details of the left side connectors for the Blackmagic Studio Camera, including LANC, headphones, and audio inputs.
Description of the right side connections for the Blackmagic Studio Camera, including optical and SDI I/O and reference input.
Details of the left side connections for the Micro Studio Camera 4K, including HDMI output and expansion port.
Description of the right side connections for the Micro Studio Camera 4K, including audio in, SDI I/O, and headphone/talkback.
Details on using the expansion cable for various control options on the Micro Studio Camera 4K.
How to configure camera settings like video format, gain, detail, and white balance.
Explanation of auto exposure options: Iris, Shutter, Iris + Shutter, Shutter + Iris, and Manual Trigger.
How to adjust audio input levels, microphone levels, and phantom power.
Adjusting display settings for the LCD, including HDMI meters and brightness.
Configuring camera number, reference source, and audio levels for studio operation.
Configuring remote functions using the S.Bus protocol for custom control.
Mapping camera functions like trigger, iris, focus, and zoom to individual S.Bus channels.
Details on how to adjust lens settings, including aperture and auto focus.
Outputting bayered sensor data in RAW mode for custom debayering.
Overview of controlling Blackmagic Studio Cameras via ATEM Software Control.
Making color adjustments using DaVinci Resolve primary color corrector color wheels.
Making fine or aggressive color adjustments using color wheels in the corrector panel.
Adjusting contrast, saturation, and hue using master wheels.
Overview of VISCA commands for controlling PTZ heads via SDI.
Using the Arduino shield with a joystick to control PTZ heads via the camera.
Protocol for integrating devices with Blackmagic Design cameras and switchers.
Steps to enable RAW mode for outputting bayered sensor data.
To Next Page
