To Next Page
C
Casey JacksonAug 27, 2025
What to do if my Bluetti Audio & Video Accessories display 'GFCI Failure'?
- CColton BennettAug 27, 2025
If your Bluetti Audio & Video Accessories display 'GFCI Failure', check if the AC output PE wire is grounded.
What to do if my Bluetti Audio & Video Accessories display 'GFCI Failure'?
If your Bluetti Audio & Video Accessories display 'GFCI Failure', check if the AC output PE wire is grounded.
What to do if my Bluetti Audio & Video Accessories display 'PV1 Voltage Low'?
If your Bluetti Audio & Video Accessories display 'PV1 Voltage Low', check the PV setup. Solar panels may get a low voltage without proper working conditions.
What to do if my Bluetti Audio & Video Accessories display 'PV1 Voltage High'?
If your Bluetti Audio & Video Accessories display 'PV1 Voltage High', check if the total voltage of the solar panels exceeds the limit. If it does, reduce the number of solar panels; the inverter should resume operation after calibration.
What to do if my Bluetti Audio & Video Accessories display 'DC Input Voltage High'?
If your Bluetti Audio & Video Accessories show a 'DC Input Voltage High' error, verify that the DC voltage is consistent with the battery specifications.
What to do if I see 'Grid Voltage High-ARM' on my Bluetti Audio & Video Accessories?
If the 'Grid Voltage High-ARM' error occurs frequently on your Bluetti Audio & Video Accessories, verify that the grid voltage and frequency meet the inverter's input specifications. Also, check the inverter's AC circuit breaker and connections. If the voltage and frequency are beyond the specified range, contact the BLUETTI support team.
What to do if I see 'Grid Voltage High' on my Bluetti Audio & Video Accessories?
If the 'Grid Voltage High' error occurs occasionally on your Bluetti Audio & Video Accessories, it may indicate abnormal grid conditions, and the inverter should recover once the grid stabilizes. However, if it happens frequently, verify that the grid voltage and frequency meet the inverter's input specifications. Also, check the inverter's AC circuit breaker and connections. If the voltage and frequency are out of range, contact the BLUETTI support team.
What to do if my Bluetti Portable Generator displays USB Upgrade Failure?
If your Bluetti Portable Generator displays a USB Upgrade Failure, turn the inverter on again. If the symptom persists, please contact the BLUETTI support team.
What to do if my Bluetti Portable Generator displays BMS Charge Protection?
If your Bluetti Portable Generator displays a BMS Charge Protection error, check the details on the BLUETTI app.
What to do if my Bluetti Portable Generator displays USB Format Error?
If your Bluetti Portable Generator displays a USB Format Error, ensure that the USB drive is formatted as FAT32 and its maximum memory is 32G. Also, verify that the upgrade files exist and haven't expired. Download the latest upgrade files if needed.
What to do if Bluetti EP600 reports EEPROM Read and Write Anomaly?
If your Bluetti Storage reports an EEPROM read and write anomaly, reconfigure the settings on the BLUETTI app. If the issue continues, contact the BLUETTI support team.
Essential safety rules for operating and handling the EP600 Energy Storage System.
Precautions for safe installation and electrical connections to prevent hazards.
Key functions, applications, and characteristics of the EP600 inverter.
Environment, carrier, and angle requirements for system installation.
Step-by-step instructions for installing the EP600 system.
Step-by-step guide for safely powering on the EP600 system.
Step-by-step guide for safely powering off the EP600 system.
Common error codes, their descriptions, and solutions for system issues.
Detailed technical specifications for the EP600 inverter and B500 battery pack.
General| Shape | Rectangle |
|---|---|
| Certification | UL9540A, UL1973, UKCA, RCM, PSE, ICES, FCC, CE, CB |
| Built-in display | - |
| Suitable for outdoor use | Yes |
| Power protection features | Overheating, Reverse polarity, Under voltage |
| International Protection (IP) code | IP65 |
| Waveform | Pure sine |
| Input voltage | 150 - 500 V |
| Output voltage | 230/400 V |
| Charging source | AC, Solar |
| Battery capacity | - mAh |
| Battery technology | Lithium Iron Phosphate (LiFePO4) |
| Total output power | 6000 W |
| Output current (max) | 8.7 A |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 325 mm |
|---|---|
| Width | 636 mm |
| Height | 370 mm |
| Weight | 40000 g |
