What to do if Bluetti EP600 shows PV1 Voltage High?
If your Bluetti Storage displays a 'PV1 Voltage High' error, check if the total voltage of the connected solar panels exceeds the specified limit. If it does, reduce the number of solar panels. The inverter should resume normal operation after calibration.
What to do if my Bluetti EP600 reports a USB Format Error?
If your Bluetti Storage reports a USB format error, ensure that the USB drive is formatted as FAT32 and has a maximum memory of 32G. Also, verify that the upgrade files exist and are not expired; download the latest upgrade files if necessary.
What to do if Bluetti EP600 Storage shows Grid Voltage High-ARM?
If the Bluetti Storage unit frequently displays a 'Grid Voltage High-ARM' error, verify that the grid voltage and frequency are within the inverter's specified input range. Also, inspect the inverter's AC circuit breaker and connections. If the voltage and frequency fall outside the acceptable range, it is recommended to contact the BLUETTI support team.
What to do if Bluetti EP600 shows Grid Voltage High?
If the Bluetti Storage unit frequently displays a 'Grid Voltage High' error, verify that the grid voltage and frequency are within the inverter's specified input range. Also, inspect the inverter's AC circuit breaker and connections. If the voltage and frequency fall outside the acceptable range, it is recommended to contact the BLUETTI support team.
What to do if my Bluetti Audio & Video Accessories display 'Zero Drift Anomaly-ARM'?
If your Bluetti Audio & Video Accessories display 'Zero Drift Anomaly-ARM', turn off the inverter and wait 30 minutes before restarting it. If the issue continues, contact the BLUETTI support team.
What to do if my Bluetti Audio & Video Accessories display 'Zero Drift Anomaly'?
If your Bluetti Audio & Video Accessories display 'Zero Drift Anomaly', turn off the inverter and wait 30 minutes before restarting it. If the issue continues, contact the BLUETTI support team.
What to do if my Bluetti Audio & Video Accessories display 'PV1 Overcurrent'?
If your Bluetti Audio & Video Accessories display 'PV1 Overcurrent', turn off the inverter and wait 30 minutes before restarting it. If the issue continues, contact the BLUETTI support team.
What to do if my Bluetti Audio & Video Accessories display 'LLC Output Overvoltage'?
If your Bluetti Audio & Video Accessories display 'LLC Output Overvoltage', turn off the inverter and wait 30 minutes before restarting it. If the issue continues, contact the BLUETTI support team.
Essential safety rules for operating and handling the EP600 Energy Storage System.
Precautions for safe installation and electrical connections to prevent hazards.
Key functions, applications, and characteristics of the EP600 inverter.
Environment, carrier, and angle requirements for system installation.
Step-by-step instructions for installing the EP600 system.
Step-by-step guide for safely powering on the EP600 system.
Step-by-step guide for safely powering off the EP600 system.
Common error codes, their descriptions, and solutions for system issues.
Detailed technical specifications for the EP600 inverter and B500 battery pack.
General| Shape | Rectangle |
|---|---|
| Certification | UL9540A, UL1973, UKCA, RCM, PSE, ICES, FCC, CE, CB |
| Built-in display | - |
| Suitable for outdoor use | Yes |
| Power protection features | Overheating, Reverse polarity, Under voltage |
| International Protection (IP) code | IP65 |
| Waveform | Pure sine |
| Input voltage | 150 - 500 V |
| Output voltage | 230/400 V |
| Charging source | AC, Solar |
| Battery capacity | - mAh |
| Battery technology | Lithium Iron Phosphate (LiFePO4) |
| Total output power | 6000 W |
| Output current (max) | 8.7 A |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 325 mm |
|---|---|
| Width | 636 mm |
| Height | 370 mm |
| Weight | 40000 g |
To Next Page
