What to do if Bluetti Storage shows LLC Output Overvoltage?
To address the 'LLC Output Overvoltage' error on your Bluetti storage, turn off the inverter, wait for 30 minutes, and then restart it. If the problem remains, please contact the BLUETTI support team.
What to do if Bluetti Storage shows Zero Drift Anomaly?
To address the 'Zero Drift Anomaly' error on your Bluetti storage, turn off the inverter, wait for 30 minutes, and then restart it. If the problem remains, please contact the BLUETTI support team.
What to do if Bluetti Storage shows GFCI Hardware Circuit Failure?
To address the 'GFCI Hardware Circuit Failure' error on your Bluetti storage, turn off the inverter, wait for 30 minutes, and then restart it. If the problem remains, please contact the BLUETTI support team.
How to fix PV1 ISO Failure on Bluetti EP600 Storage?
To fix a 'PV1 ISO Failure' on your Bluetti Storage, check the insulation resistor between the solar array and grounding for a short circuit.
What to do if Bluetti EP600 Storage shows PV1 Overcurrent?
To address the 'PV1 Overcurrent' error on your Bluetti storage, turn off the inverter, wait for 30 minutes, and then restart it. If the problem remains, please contact the BLUETTI support team.
What to do if Bluetti EP600 shows Balanced Circuit Input Overcurrent?
To address the 'Balanced Circuit Input Overcurrent' error on your Bluetti storage, turn off the inverter, wait for 30 minutes, and then restart it. If the problem remains, please contact the BLUETTI support team.
What to do if Bluetti EP600 Storage shows PV Input 1?
To address the 'PV input 1' error on your Bluetti storage, turn off the inverter, wait for 30 minutes, and then restart it. If the problem remains, please contact the BLUETTI support team.
What to do if Bluetti EP600 reports USB Upgrade Failure?
If the Bluetti Storage reports a USB upgrade failure, turn the inverter on again. If the issue persists, contact the BLUETTI support team.
What to do if Bluetti EP600 Storage shows Operating Ambient Temperature Anomaly?
If the Bluetti Storage displays an 'Operating Ambient Temperature Anomaly', ensure that the system is used within the specified temperature range. If the problem persists, contact the BLUETTI support team.
What to do if the USB upgrade fails on my Bluetti Battery Pack?
Turn the inverter on again. If the problem continues, contact BLUETTI support.
Essential safety rules for operating and handling the EP600 Energy Storage System.
Precautions for safe installation and electrical connections to prevent hazards.
Key functions, applications, and characteristics of the EP600 inverter.
Environment, carrier, and angle requirements for system installation.
Step-by-step instructions for installing the EP600 system.
Step-by-step guide for safely powering on the EP600 system.
Step-by-step guide for safely powering off the EP600 system.
Common error codes, their descriptions, and solutions for system issues.
Detailed technical specifications for the EP600 inverter and B500 battery pack.
General| Shape | Rectangle |
|---|---|
| Certification | UL9540A, UL1973, UKCA, RCM, PSE, ICES, FCC, CE, CB |
| Built-in display | - |
| Suitable for outdoor use | Yes |
| Power protection features | Overheating, Reverse polarity, Under voltage |
| International Protection (IP) code | IP65 |
| Waveform | Pure sine |
| Input voltage | 150 - 500 V |
| Output voltage | 230/400 V |
| Charging source | AC, Solar |
| Battery capacity | - mAh |
| Battery technology | Lithium Iron Phosphate (LiFePO4) |
| Total output power | 6000 W |
| Output current (max) | 8.7 A |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 325 mm |
|---|---|
| Width | 636 mm |
| Height | 370 mm |
| Weight | 40000 g |
To Next Page
