17
2) Click , and the following window will appear:
3) Perform the desired configuration:
1
Can be used to lock the Netsilon control panel when the box is checked.
> This function can be used to prevent any misuse by a third party.
2
Can be used to disable the USB port located on the panel when the box is checked.
> This function can be used to prevent the insertion of a USB key containing malicious files by a third party.
3
Can be used to select the language displayed on the Netsilon LCD screen.
> By default: English
> Available languages: English, French, Spanish, German, Dutch, Italian.
4
Can be used to select the scrolling parameters displayed on the LCD standby screen:
> Time
> Local time and date.
> Network
> IP address
> Subnet mask
> Gateway.
> Synchronisation
> Display of source(s) of synchronisation (primary and/or secondary).
> System
> Display of system status (synchronised, holdover, change of reference between primary and secondary
synchronisation, non-synchronised and autonomous). In order to understand these statuses, refer to
Annex1:Synchronisation.
5
Can be used to set the scrolling display time between each element (Time, Network, Synchronisation and
System) in seconds.
4) Click
to apply the changes.
1
2
3
4
5
To Next Page
Loading...
General