38
4.6.6. NTPAutokey
To enable NTP autokey mode, follow these steps:
1) TIME menu > NTP > NTP Autokey:
2) Click
, and the following window will appear:
1
Tick the box to enable and define the autokey.
2
Enter the passphrase, complying with the number of characters indicated.
3
Before a server can be designated as a client or server, it must be designated as trusted. When designating a
server as trusted, select Trusted, then save. A certificate is then generated for the network.
4
Certificate. This certificate is to be copied and pasted into the NTP Autokey parameters of the client servers.
Example:
1
2
3
4
thecertificateisvalidforoneyear,butis
automaticallyrenewedeverymonth.
To Next Page
Loading...
General