37
To enable NTP key mode, follow these steps:
1) TIME menu > NTP > NTP key:
2) Add an NTP key by clicking on , and the following window will appear:
1
Tick this box to use authentication with a trusted key (by default, the NTP service only acknowledges trusted
keys). The principle involves assigning and checking if the key for each network device intended to communicate
with Netsilon is correct.
2
Enter a number between 1 and 65534. Netsilon supports MD5 authentication by default. This function assigns
an authenticator, composed of a key and an MD5 message at the end of each request. This ensures that the NTP
transmission has come from a trusted NTP server or client.
3
Choose the authentication from the following list:
- MD5
- SHA
- SHA1
- MDC2
- RMD160
- MD4
4
Enter a key with 1 to 16 characters (special and non-alphabetic characters not permitted). E.g: !, $, #, %)
1
2
3
4
To Next Page
Loading...
General