Bodet NETSILON 7 - 7. CONTROL PANEL MENUS; USB Transfer Menu for Programming

62
7.1.3. USB transfer menu
The Netsilon time server can load or save its programming by means of a USB key.
Before creating any new programming, it is necessary to save the existing set-up on a USB key.
or
10:54.32
Tues19SEP2016
S y s t e m     o k 
Network  õ
S y s t e m     o k 
Network  õ
Network  ok
USBtransfer õ
B a c k u p     o k 
DownloadsoftUCõ
DownloadsoftUCo k 
õ
ConnectUSBkeythen 
pressokexitC
ConnectUSBkeythen
pressokexitC
Selectprogload<
Selectsave>
Confirmload  o k 
softUC<-
RemoveUSBcard
Transferinpro-
gress...
USBtransfer ok
õ
10:54.32
Tues19SEP2016
Rebootinprogress...
10:54.32
Tues19SEP2016
Firmware update from USB
key
1
1
AfterloadingthefirmwaretotheUSBkey,Netsilonwillrestart.
Save or load firmware to
the USB key