Bodet NETSILON 7 - Configuring the Time Zone; Defining the Local Time System and Date; Creating a Time Zone Manually

21
4.3 Conguringthetimezone
thetimezonesectionenablescentralisedtimezonecreation.Eachoutputcanbedefinedinatime
zone,definedearlierinthischapter.
4.3.1. Deningthelocaltimesystemanddate
thelocaltimeshouldonlybechangedwhenreplacingtheCR2032battery.
For the local time system and date, follow these steps:
1) TIME menu > Time zones > Local time system.
2) Click , and the following window will appear:
3) Manually change the time and date.
4) Select the time zone from the drop-down menu. Time zones previously added are shown:
Local time is the time displayed on the LCD screen.
4.3.2. Creating a time zone manually
To create a time zone, follow these steps:
1) TIME menu > Time zone > Time zones.
The UTC reference is present by default.
2) Click to create a zone, then tick Manual, and the following window will appear:
1
2
3