Bodet NETSILON 7 - Firmware Version and Online Help; Factory Configuration; Restarting or Switching off Netsilon

53
4.11.3. Firmware version and online help
To view the Netsilon firmware version and option cards, proceed as follows:
1) SYSTEM menu > General > Versions:
To access the product manual, proceed as follows:
1) SYSTEM menu > General > Online help:
4.11.4. Factoryconguration
To reset Netsilon to factory configuration, follow these steps:
1) SYSTEM menu > Tools > Upgrade and backup.
2) Click , and the following window will appear
allconfigurationswillbelostintheeventofafactoryconfigurationreset.
The link to the web server will be broken because the IP address is lost: it is necessary to reconfigure the network
settings to access the web server (refer to Chapter 3. Commissioning, and perform the operations described).
The default configurations are re-established (see Chapter 3.1 Factory configuration)
4.11.5. RestartingorswitchingoffNetsilon
To restart Netsilon, follow these steps:
1) SYSTEM menu > Tools > Reboot > Restart.
2) Click , and the window opposite will appear:
To switch off Netsilon, follow these steps:
1) SYSTEM menu > Tools > Reboot > Shut down.
2) Click , and the window opposite will appear:
The product is switched off, but the power supply is still on: Green LED POWER light is on and the LCD screen
remains in standby mode.