Bodet NETSILON 7 - CURRENT LOOP Expansion Card (Ref. 907944)

42
4.7.3. CURRENTLOOPexpansioncard(ref.907944)
The Current Loop expansion card can be used to distribute time by radio (DCF) via current loop.
To configure the Current Loop output, follow these steps:
1) TIME menu > Outputs > Slot C: Current Loop:
2) Configure the output by clicking , and the following window will appear:
3) Select the time zone which will be transmitted via the Current Loop expansion card.
4) Enable the output using the
button, then save.