8
SAVE THESE INSTRUCTIONS
Additional Safety Rules
Intended Use
Develop a periodic maintenance schedule for
your tool. When cleaning a tool be careful not
to disassemble any portion of the tool since in-
ternal wires may be misplaced or pinched or
safety guard return springs may be improperly
mounted. Certain cleaning agents such as gaso-
line, carbon tetrachloride, ammonia, etc. may
damage plastic parts.
Some dust created by power
sanding, sawing, grinding,
drilling, and other construction activities con-
tains chemicals known to cause cancer, birth
defects or other reproductive harm. Some ex-
amples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products, and
• Arsenic and chromium from chemically treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic par-
ticles.
THINK SAFETY
SAFETY IS A COMBINATION OF OPERATOR COM-
MON SENSE AND ALERTNESS AT ALL TIMES
WHEN POWER TOOLS ARE BEING USED.
SAVE THESE INSTRUCTIONS
Use this table saw only as in-
tended. Unintended use may
result in personal injury and property damage.
This table saw is designed for professional rip,
cross, miter, bevel and non-thru cut applications
in various materials.
Do not use this table saw for cutting metals, such
as aluminum or copper, or any masonry or ce-
ment materials.
Do not use wobble or adjustable dado sets with
this table saw.
Do not perform tapered cuts without a tapered
jig accessory.
To Next Page
Loading...
