Settings
System
Here you can choose from the following tabs General, Playback, Display, Serial port, Account
and Service.
General
General
Language: Select here your desired language for the user interface.
Video standard: (only for hybrid models) Assign here your applicable video standard (PAL or
NTSC) or use Auto-detect (default).
Device name: If required, assign here a unique identification name for this DVR.
Device no: Assign here an identification number (between 0 and 998) to be used by the
remote control to control multiple DVRs.
Auto logout: Set here a time for automatic logout if a user is inactive for a period of time: 1 to
60 minutes (default is ‘Never’ - the user remains permanently logged on until logout or
shutdown).
Export Type: Choose here the file type for exported files: DAV and/or ASF (default is both)
Show start-up wizard at next start-up: Select to force the user to assign settings requested
by the Startup wizard after the next system restart.
Mouse sensitivity: Set here the mouse double-click speed required for selections.
Display logo: Activate or import a logo to appear automatically on the ‘System login’ and
‘Playback disclaimer’ screens. See below for how to import a logo.
Date & Time
System time: Click on the appropriate number to change it with the numeric keypad popup.
The number format can be changed in the field below. The system is always started in default
24-hour mode. Select the correct GMT time zone. Click <Save> if you make any changes to the
time.
Date format: Choose here between:
– YYYYMMDD (year month day) this is the default
– MMDDYYYY
– DDMMYYYY
Time format: Choose here between 12-hour and 24-hour.
Daylight saving time: Select checkbox to automatically set daylight saving in the DVR internal
clock. Set the Start/End times for daylight saving by assigning the relevant times for the
current year (assign ‘Month’; the ‘Week in the month’ and the ‘Day of the week’).
NTP: Select checkbox to automatically synchronize the recorder internal clock using Network
Time Protocol. If required, assign the Server, Port (default is 123) and synchronization
Interval (default is 60 minutes).
Press <Manual update> to synchronize the time immediately.
IP camera time sync: Select checkbox to automatically synchronize the time in the IP cameras
connected to the recorder. Assign a synchronize interval if required (default is 24 hours).
Logo import
The logo file must be:
– maximum 500 KB
– maximum 260 x 150 pixels
– 8 or 16 bits .BMP file format
Use the following steps to import a company logo:
8
8.1
8.1.1
DIVAR 2000 / DIVAR 3000 / DIVAR
5000
Settings | en 31
Bosch Security Systems Operation Manual 2016.09 | v1.0 | AM18-Q0717
To Next Page
Loading...
Need help?
General
Weight and Dimensions
