Activate sequence on monitor A (or B)
1. To view a sequence of live camera pictures from several cameras:
– Right-click the mouse to access the Quick menu
– Choose Sequence on
2. Check that a sequence of camera pictures appears,
3. To stop sequencing, right-click the mouse to access the Quick menu, and choose
Sequence off
Monitor A
Monitor A shows live pictures of connected cameras in full-screen or multiscreen, plus status
messages and alarm events (e.g. motion and video loss warnings). When multiple events
occur, camera pictures can also be sequenced on monitor A to follow the events.
The search/play function and all user menus are also activated on this monitor.
Monitor B (only for DIVAR 5000 models)
Monitor B displays live pictures in full-screen or multiscreen (up to 16 channel can be shown
at one time, with a choice of which channels to show e.g. channels 1 to 16, or channels 17 to
32).
If an alarm/detect event is signaled, the camera picture with the event can be displayed on
monitor B. When multiple events occur, camera pictures can also be sequenced on monitor B
to follow the events.
9.2.4
9.2.5
DIVAR 2000 / DIVAR 3000 / DIVAR
5000
Operation | en 59
Bosch Security Systems Operation Manual 2016.09 | v1.0 | AM18-Q0717
To Next Page
Loading...
