EasyManua.ls Logo

Bosch DIVAR 3000 - System Version; Network Online Users; Poe Usage; Network Load

Bosch DIVAR 3000
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fan speed (only for DIVAR 3000 models) - values shown are Current, Average, Highest,
Lowest)
System Version
View here the status of your installed system:
hardware features (device, channels, alarms in/out)
software features
system version of your currently installed firmware
build date of the firmware
web id
serial number
Notice!
Bosch strongly recommends upgrading to the latest firmware for the best possible
functionality, compatibility, performance and security.
Check http://downloadstore.boschsecurity.com/ regularly to see if there is a new firmware
version available.
Network Online users
Manage here the online users:
Disconnect a user by selecting the user and press <Disconnect>.
Block a user for a max disconnection time:
Select the user
Click Block time (default is 60 seconds) and select <Block >
The system displays a list of the blocked users, and refreshes every five seconds to detect any
newly added or deleted users. To unblock a user, select the user and choose <Unblock>.
PoE usage
This info page shows a list of all cameras connected to the PoE slots, and the total amount of
power they are using. Use the Block checkbox for a camera to prevent the camera drawing a
PoE supply from that slot.
Network Load
See here a real time graphical display of the current load on the network for send and receive
traffic. There are two network connections and the load can be seen for each network by
selecting the relevant network interface.
Network Test
Choose here to do a network test as follows:
1. Enter a Destination IP address.
2. Click <Test>.
3. Check the test result in the Test result field.
Or choose to do a Network sniffer packet export as follows:
1. Enter a Device name (click <Refresh> if the device is not shown).
2. Enter an Address (click <Browse> to search for the correct path).
3. Select LAN.
4. When the correct sniffer packet is shown, click
to start the export.
9.4.3
9.4.4
9.4.5
9.4.6
9.4.7
68 en | Operation
DIVAR 2000 / DIVAR 3000 / DIVAR
5000
2016.09 | v1.0 | AM18-Q0717 Operation Manual Bosch Security Systems

Table of Contents

Related product manuals