DSS user interface
3–2
1070 066 037-101 (00.02) GB
Status bar
Current interface (COM1, 2 or ”Offline”)
Parameter currently or last transferred
Transmission activity display
Current axis number
Current drive phase
”Overview” window
The ”Overview” window shows a single-line diagram of the entire system.
The meaning of the command buttons is also displayed when the mouse
pointer is on the command button.
Command buttons and available functions
Selecting command buttons that have several functions will open up a
pull-up menu.
– Monitor (edit parameter on-line)
– Load file (edit parameter off-line)
– DSS expert
– DSS post office (not with CANrho
interface)
(Parameterization)
(Global
information)
(Oscilloscope,
no function with analog interface)
(Setpoint generation,
only for user group of
”Service Level 2”)
(Interface)
(Axis x)
– Module configuration
– Module status display
– I/O signals
– Cyclic telegram
– Watch parameter numbers
– Setpoint box
– Setpoint generator
– starts the ”Establish connection” dialog
– calls up predefined parameter lists
To Next Page
Loading...
