Brady BradyPrinter i5100 - Settings Management (Save, Load, Reset); Password Reset Function

47
i5100 Conguration Manual
9 Extras
9.4 Load Settings
AprintercongurationpreviouslysavedtoastoragedevicecanbeloadedwiththeLoad settings function.
 Start menu.
 Select Extras.
IfthemenuisprotectedviaaPINapromptappearsinthedisplay.Enterthecodenumberandconrmit.
 Select Load settings.
 Selectthedesiredle.
 Conrmtheselectionwith .Loadingofthecongurationdatastarts.DonotremovetheUSBashdriveuntilthe
loading procedure is complete. The printer returns to the Extras menu.
If an error occurs during the loading procedure, an error message appears in the display. Restart the loading procedure in
thiscase.Ifanerroroccursagain,thecongurationparametersmustbeenteredviathecontrolpanel.
9.5 Reset Settings
With the Default settings function all setup parameters excepting the passwords  page 16 can be reset to the default
values.
 Start menu.
 Select Extras.
IfthemenuisprotectedviaaPINapromptappearsinthedisplay.Enterthecodenumberandconrmit.
 Select Reset settings.
The display shows "Reset settings".
 Select Continue. The setup parameters will be reset and printer returns to the Extras menu.
9.6 ResetPasswords
The function Reset passwords allows to reset all passwords for the network services to the default values.
 Start menu.
 Select Extras.
IfthemenuisprotectedviaaPINapromptappearsinthedisplay.Enterthecodenumberandconrmit.
 Select Reset passwords.
The display shows "Reset passwords".
 Select Continue. The passwords will be reset and printer returns to the Extras menu.
Function User name Password
Web interface access admin admin
FTP printing ftpprint print
FTP access to storage devices ftpcard card
FTPrmwareupdate ftpadmin admin
Web service soap soap
Table 26 Default passwords