Brady BradyPrinter i5100 - Remote Access via VNC; VNC Setup and Connection

57
i5100 Conguration Manual
13 Remote Access via VNC
VNC is a software that allows remote control of a printer's operation control panel (server) via a computer (client) through
input devices like keyboard and mouse.
VNC ist not platform dependent and enables the use of a Windows computer as well as a mobile Android or iOS system
as an external remote control. The prerequisite for this is the installation of a VNC client on the system used.
PreparingtheComputer
 Install the VNC client on the computer.
PreparingthePrinter
 Activate the VNC server under Setup > Interfaces > Network services > VNC server.
 Enter password vnc under Security > Password VNC.
For Wireless Access:
 Activate Wi-Fi under Setup > Interfaces > Wi-Fi > Wi-Fi.
 Find out the Wi-Fi-IP-Address under Info.
For Ethernet Access:
 Find out the Ethernet-IP-Address under Info.
EstablishingaConnection
 Start the VNC client on the computer.
 Enter the IP address and password vnc inthecongurationoftheVNCclient.
 Activate the connection.
The menu of the printer will be visible and usable vie mouse click, keyboard or touch-pad just like on the printer itself.