Brady BradyPrinter i5100 - Cleaning Interval and Legal Notices

48
i5100 Conguration Manual
9 Extras
9.7 Cleaning Interval
With the parameter Cleaning interval an interval for the printhead cleaning can be set in steps of 100 m media passage.
Ifthesetlengthofthemedium(labelstrip,transferribbon)haspassedtheprintheadandanerroroccursintheowofthe
medium (e.g. label end, transfer ribbon end), the Clean printhead! message appears in the display.
The error message for the error which occurred is not displayed until the Clean printhead! message is acknowledged. As
longasnoerrorsoccurinthemediumow,nomessagesaredisplayedandtheprintjobiscontinuedevenifthecleaning
interval has passed.
 Start menu.
 Select Extras.
IfthemenuisprotectedviaaPINapromptappearsinthedisplay.Enterthecodenumberandconrmit.
 Select Cleaning interval.
 Selectanewvalueandconrmtheselectionwith .
9.8 Legal Notices
The Legal noticesfunctionshowsthelicensesandsoftwarelibrariesofthirdpartysolutionsusedintheprinterrmware.
 Start menu.
 Select Extras.
IfthemenuisprotectedviaaPINapromptappearsinthedisplay.Enterthecodenumberandconrmit.
 Select Legal notices.
The notices will be shown on the display
 Select Close to leave the notices.