Braun Infusomat Space Instructions For Use

5
INFUSOMAT® SPACE OVERVIEW
The pump is now securely attached to Pole
Clamp.
• Do not position the pump unit over the
patient.
• DO NOT use any Pole Clamp that shows
signs of damage.
• DO NOT use Pole Clamp with missing
clamp grids.
Underside view
Clamp grids
Locking Devices Together
A maximum of three pumps (Infusomat®
Space or Perfusor® Space) may be
inter-locked on a single pole clamp.
Caution: Avoid external mechanical
action.
Line up the grooves of the lower pump with
the slots of the upper pump and slide the
lower pump in until the lock clicks and the
green buttons are aligned with each other.
To disconnect, push green locking button of
upper pump and slide
lower pump out.
Attaching Pump to Pole Clamp
Line up slots on top sides of pump with
grooves of Pole Clamp and slide pump into
Pole Clamp until locking mechanism clicks.
To remove, simultaneously press release
button on frame and push handle down
while pulling pump out from pole clamp.
Pole clamp
handle
Pole clamp
release button
Pump slots

Braun Infusomat Space Specifications

General

Type	Infusion Pump
Power Supply	AC/DC adapter, rechargeable battery
Display	Color graphic display
Alarms	Audible and visual alarms
Flow Rate Accuracy	±5%
Occlusion Pressure	Adjustable
VTBI Range	0.1 – 9999 ml
KVO Rate	0.1 – 5 ml/h (adjustable)
Battery	Lithium-ion
Operating Modes	Continuous
Certifications	CE, ISO 13485, IEC 60601-1