To Next Page

To Previous Page

Brookeld Engineering Labs., Inc. Page 19 Manual No. M13-167

II.5.3 View Results

Testresults(datales)canbesavedtotheinternalmemoryoftheDV2TortoaUSBFlashDrive.

TheseslescanbereloadedintotheDV2Tforreview,analysis,orprintingthroughtheViewResults

function.AleofTestResultsthatissavedontoaUSBFlashDrivecanbeviewedonanyDV2T

Viscometer.

WithintheViewResultsfunction,theusercanaccesstheinternalmemoryoftheDV2TViscometer

oranyUSBFlashDrivethatisconnectedtoaUSBport .Theviscometerwillpointtothe

USB FlashDriveaccordingtotheorderinwhichitisconnected.TherstUSBFlashDrivethat

is connected will bereferredtoas#1onboththeViewResultsscreenandtheStatusBar.Youcan

haveasmanyasthreeUSBFlashDrivesconnectedtotheDV2Tatanytime.

Resultslesthataredisplayedonthescreencanbesortedbydateofcreationorbyalpha/numeric.

ThissortingisselectedbypressingtheNavigationIcon or .

TIP: YoucanusetheManageFilesfunction tomoveResultslesfrominternalmemoryto

aUSBFlashDrive.

II.5.4 Manage Files

ResultFilesandTestFilescanbemanagedintheinternalmemoryoronUSBFlashDrivesfromthe

ManageFilesfunction.Folderstructurescanbeaddedorchangedtoassistwithdatamanagement.

Filesmaybecopied,moved,renamedordeleted.AccesstothisfunctioncanbelimitedwhenUser

IDandLogInfunctionsareimplemented(seeSectionIV.4.2).

Filesthataredisplayedonthescreencanbesortedbydateofcreationorbyalpha/numeric.This

sortingisselectedbypressingtheNavigationIcon or .

II.5.5 External Mode

TheDV2TViscometercanbecontrolledfromacomputerthroughtheuseofoptionalBrookeld

SoftwareRheocalcT.TheviscometermustbeplacedintoexternalcontrolmodefromtheMain

.TheviscometermustbeconnectedtothecomputerwithaUSBAcable(DVP-202).

TIP: TheStatusBarwillindicateaproperconnectiontothecomputerbydisplayingtheComputer

Icon .

TheDV2TwilldisplayExternalModewhenconguredforoperationwiththecomputer.This

displayincludesaReturnbuttonthatwillresettheviscometertostandaloneoperation.

II.6 Range

The DV2T Viscometer will calculate the measurement range for a specic spindle and speed

combination.Thisinformationisdisplayedonthescreenwhileselectingthespindlenumberas

showninFigureII-6.TheRangeisalsoshownintheRunningViscosityTestviewduringthe

measurement.ViscositywillbedisplayedintheunitofmeasurespeciedinSettings and is

settocentipoise(cP)fromthefactory.

Brookfield DV2T User Manual

Questions and Answers: