Brookfield DV2T - IV.4 Admin Functions; IV.4.1 Log In And Log Out

Brookeld Engineering Labs., Inc. Page 49 Manual No. M13-167
IV.4 Admin Functions
TheAdminFunctionsmenuincludessettingsrelatedtoaccessandbasicinstrumentmanagement
oftheDV2T.TheAdminFunctionsmenuisonlyavailabletotheAdministratorwhenLogInis
required.UsersandPowerUsersdonothaveaccessrightstotheAdminFunctions.Ninesettings
are available including:
Log In and Lock Out - RequireUserIDandPassword.DeneLockOutparameters.
Users and Access - DeneUserID,Password,Usercapabilities.AddUser.
SetTimeandDate - Setthetimeanddate.
Backup and Import - UpdateInstrumentFirmware,addLanguagele,BackUp
data and settings.
DefaultPath - DenethelogicfortheDefaultPathforsavingdataandtests.
SettingsReset - ResetbasicsettingstoDV2Tfactorydefault.
DeviceReset - ResettheentireDV2Ttofactorydefault.
CalibrationReminder - Establishuseandfrequencyofcalibrationreminder.
SaveAuditTrail - ExporttheAudittrailtoassistBrookeldwhentroubleshooting
DV2Toperation.
IV.4.1 Log In and Lock Out
TheLogInandLockOutmenuallowstheusertodenetheLogInrequirementandtogglethe
LockOutfeaturewithinRunningViscosityTest(seeFigureIV-9).
Figure IV-9
TheLogIncheckboxcontrolstheLogInrequirement.WhenLogInischecked,theDV2Twill
requireaUserIDandPasswordpriortoallowinganyactivity.TheLogInscreenispresentedon
poweruporwhentheUserIcon isselectedfromtheHomeMenu.Theusermustselecttheir