Brookfield DV2T - II.3 Measurement Execution and Results

Brookeld Engineering Labs., Inc. Page 20 Manual No. M13-167
Range
Figure II-6
TIP: TheRangevalueisthesameastheAutoRangeavailableonearlierBrookeldviscometer
models.
II.7 Out of Range
TheDV2TViscometerwillgiveonscreenindicationswhenthemeasurementisoutofrangeof
theinstrument.Whenthe%Torquereadingexceeds100%(overrange),thedisplayof%Torque,
Viscosity,andShearStresswillbeEEEE(seeFigureII-7).Ifthe%Torquevalueisbetween0-
9.9%,thedataeldlabelwillash.Whenthe%Torqueisbelowzero(negativevalues),thedisplay
ofViscosityandShearStresswillbe----.
TIP: Brookfieldrecommendscollectingdataonlywhenthe%Torquereadingisbetween
10-100%.
Figure II-7