Brooks MT3809G - Optional Valves and Flow Controllers; Optional Electronic Features; Inductive Alarms

Installation and Operation Manual
X-VA-MT3809G-MT3810G-eng
Part Number: 541B182AAG
July, 2018
Models MT3809G & MT3810G
1-6 Optional Valves and Flow Controllers
Needle valves and ow controllers may be externally piped into the inlet or
outlet side of the instrument. Needle valves can be supplied up to size 12
1-1/2" maximum 10000 l/hr / 46 gpm water equivalent. Needle valves and
ow controllers will be supplied separately with the anged meter.
1-7 Optional Electronic Features
Electronic equipment available with the Model MT3809 includes:
• Current loop 4-20mA/HART Transmitter with Alarms and Pulse Output
• Foundation Fieldbus Transmitter with Alarms and Pulse Output
• Inductive Alarms; stand-alone or in combination with above transmitters
Refer to the table below for the model code nomenclature for the
electronics options. All models are designed to be either intrinsically safe
or explosion proof.
Nomenclature and Type Designation
MT3809 … B …
I-IV XV
XV
Electronics
configuration
B, C
D … L
M … U
Indicator with inductive alarm, 1 or 2 switches
Transmitter, 4 – 20 mA / Hart, with optionally:
- pulse output
- inductive alarm contact(s)
- LOI
or combinations thereof.
Transmitter, FOUNDATION Fieldbus, with optionally:
- pulse output
- inductive alarm contact(s)
- LOI
or combinations thereof.