Installation and Operation Manual
X-VA-MT3809G-MT3810G-eng
Part Number: 541B182AAG
July, 2018
Models MT3809G & MT3810G
2-6-2 4-20 mA/HART Transmitter Division 2 Installation
If the area classication is Division 2, a barrier is not required and cable
parameters are not applicable. The electrical code will require the use of
conduit for wire protection. Refer to Figure 2-5a/2-5b.
2-6-3 4-20 mA/HART Transmitter Flameproof Installation
For ameproof installation, the optional explosion proof enclosure is
required and explosion proof installation methods must be followed. Refer
to Figure 2-9.
To Next Page
Loading...
