2-17
Confidential
Jam Tray 1 Remove the jammed
paper from Tray 1.
When printing from the paper tray,
the registration front sensor does
not detect paper pass within the
specified time after the paper feed
sensor detected paper pass.
7300 2-40
Manual Feed Load paper. There is no paper set in the
manual feed slot on the manual
feed slot fix mode.
8C00 2-43
Machine Error ** ― A machine error occurred. Refer to
error code “**”.
---
No Access Point ― Cannot find the connectable
access point.
--- 4.5.2
No Paper Load paper. When printing from the paper tray,
the paper feed sensor detected
that there was no paper set in the
tray.
9302 2-44
No Toner Open the Front Cover,
then install the Toner
Cartridge.
The new toner sensor detected
that the toner cartridge was not
set.
6101 2-36
Out of Memory Press Go for 2
seconds.
There is insufficient memory to
expand PC print data.
C700 2-45
Print Overrun ― First side printing started before
finishing receiving the second side
data in duplex printing mode due
to the insufficient memory.
8000 2-42
Print Unable ** Printing related error. Refer to
error code “**”.
--- ---
Replace Drum ― The number of rotations of the
drum unit has reached the upper
limit. (Printing does not stop.)
4200 2-33
Replace Toner Open the Front Cover,
replace Toner
Cartridge.
Dot count or develop roller counter
of the toner has reached the upper
limit in the toner stop mode.
4C01 2-34
― Dot count or develop roller counter
of the toner has reached the upper
limit in the toner continuous
printing mode.
4D01 2-34
First line Second line Description
Error
codes
Refer
to:
To Next Page
Loading...
Need help?
General
