Polling
Polling overview
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else's fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polling receive
Polling receive lets you call another fax
machine to receive a fax.
Setup to receive polling
@ Press (Fax).
Press • or • to choose Polling RX.
Press OK.
Press • or • to choose On (or off).
Press OK.
O Enter the fax number you are polling.
Press Black Start or Color Start.
The LCD shows Dialing.
Sequential polling
Sequential polling lets you request
documents from several fax machines in one
operation. Afterwards, a Sequential Polling
Report will be printed.
@ Press (Fax).
Press • or • to choose Polling RX.
Press OK.
Press • or • to choose On (or off).
Press OK.
O Press • or • to choose
Broadcasting.
Press OK.
Press • or • to choose Add Number,
Press OK.
Enter a number using Speed-Dial, a
Group, or the dial pad.
Press OK.
@ Repeat steps 0 and • for all the fax
numbers you want to poll, and then
press • or • to choose com#1ete,
Press OK.
Press Black Start or Color Start.
The machine polls each number or
Group number in turn for a document.
Press Stop/Exit while the machine is dialing
to cancel the polling process.
To cancel all sequential polling receive jobs,
see Checking and canceling waiting
jobs on page 44.
89
To Next Page
Loading...
Need help?
General
