Brother MFC-665CW - Adjusting Brightness, Contrast and Color

Chapter 14
Adjusting Brightness,
Contrast and Color
Brightness
Press • or • to choose Brightness.
Press OK.
Press _1to make a darker copy or press
I_ to make a lighter copy.
Press OK.
If you do not want to change additional
settings, press Color Start to print.
Contrast
You can choose the contrast setting. More
contrast will make an image look sharper and
more vivid.
Press • or • to choose Contrast.
Press OK.
Press I_ to increase the contrast or
press _1to decrease the contrast.
Press OK.
If you do not want to change additional
settings, press Color Start to print.
Color Enhancement (True2Life ®)
The color enhancement (True2Life ®) feature
will produce more vivid images. Your
photographs will take slightly longer to print.
Press • or • to choose True2Li_e.
Press OK.
@ Do one of the following:
m If you want to customize the White
Balance, Sharpness or Color
Density, press _1or I_ to choose on
and then go to step 0.
m If you do not want to customize,
press _1or I_ to choose off.
Press OK and then go to step 0.
Press • or • to choose
White Balance, Sharpness or
Color Density.
Press OK.
O Press _1or I_ to adjust the degree of the
setting.
Press OK.
Do one of the following:
m If you want to customize other color
enhancement, press • or • to
choose other option.
m If you want to change other settings,
press • or • to choose Exit., and
then press OK.
If you do not want to change additional
settings, Color Start to print.
Note ...................................................................................
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other factors will effect the
appearance of white. By using this
adjustment, you can correct this effect and
bring the white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image. It is similar to adjusting the fine
focus on a camera. If the image is not in
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Color Density
This setting adjusts the total amount of
color in the image. You can increase or
decrease the amount of color in an image
to improve a washed out picture.