Loading documents and paper
Loading documents
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the ADF
The ADF can hold up to 10 pages and feeds
each sheet individually. Use standard 20 Ib
(80 g/m 2) paper and always fan the pages
before putting them in the ADF.
Recommended environment
Temperature:
Humidity:
Paper:
68 to 86 ° F (20 to 30 ° C)
50% to 70%
20 Ib LTR (80 g/m 2 A4)
Document Sizes Supported
Length: 5.8 to 14 in.
(148 to 355.6 mm)
Width: 5.8 to 8.5 in.
(148 to 215.9 mm)
Weight: 17 to 24 Ib (64 to 90 g/m 2)
How to load documents
DO NOT pull on the document while it is
feeding.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric.
i
m Make sure documents written with ink are
completely dry.
Fan the pages well. Make sure you put
the documents face down, top edge
first in the ADF until you feel them touch
the feed roller.
Adjust the paper guides to fit the width of
your documents.
Unfold the ADF Document Output
Support Flap (1).
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
11
To Next Page
Loading...
Need help?
General
