General setup
Fax
Receive :
O£f
(factory
setting)
Fax
Receive :
On 1 2
Fax Only
External
HC:Hsg
Ctr 4
Hanual
Fax/Tel 5
No machine
operations will be
available.
Fax Receive
Easy Receive
Delayed Fax 6
Fax Forward 6
Paging 6
Fax Storage 6
PC Fax Receive 6
Remote Retrieval 6
Fax Receive,
Recording of
incoming messages,
Easy Receive
Delayed Fax 6
Fax Forward 6
Paging 6
Fax Storage 6
PC Fax Receive 6
Remote Retrieval 6
Easy Receive,
Delayed Fax 6
1 You cannot receive a fax with Black Start or
Color Start.
2 You can receive telephone calls by lifting the handset
(MFC-665CW only).
3 MFC-440CN only
4 MFC-665CW only
5 (MFC-440CN only) You cannot receive a fax
automatically even if you have set the
receive mode to Fax/Tel.
6 Set before you switch off the machine.
Mode Timer
The machine has four temporary mode keys
on the control panel: Fax, Scan, Copy and
PhotoCapture. You can change the amount
of time the machine takes after the last Scan,
Copy or PhotoCapture operation before it
returns to Fax mode. If you choose off, the
machine stays in the mode you used last.
Fax
Scan
Copy
Photo Capture
Press Menu.
Press • or • to choose
General Setup.
Press OK.
Press • or • to choose Hode Timer,
Press OK.
O Press • or • to choose 0 Sec,
3 O Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press OK.
Press Stop/Exit.
2s
To Next Page
Loading...
Need help?
General
