@
@
@
Do one of the following:
m Enter the name (up to 16 characters
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text on page 170.)
[] To store the number without a name
press OK.
Press OK to confirm the fax or
telephone number.
Do one of the following:
[] Enter the second fax or telephone
number (up to 20 digits).
Press OK
[] If you do not want to store a second
number, press OK.
Press Stop/Exit.
Changing Speed-Dial names
or numbers
You can change or delete a Speed-Dial
number that has already been stored.
Press Menu.
Press • or • to choose Fax.
Press OK.
Press • or • to choose
Set. Quick-Dial.
Press OK.
O Press • or • to choose Speed-Dial,
Press OK.
Press • or • to choose the 2-digit
Speed-Dial location you want to change.
Press OK.
@
Do one of the following:
[] Press • or • to choose Change,
Press OK.
[] Press • or • to choose Delete.
Press OK.
Then, confirm the Delete by
pressing 1 and Stop/E×it.
Dialing and storing numbers
Note .................................................................................
How to change the stored name or
number:
If you want to change a character, press _1
or I_ to position the cursor under the
character you want to change, and then
press Clear/Back. Re-enter the
character.
Do one of the following:
[] Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(See Entering Text on page 170.)
[] If you do not want to change the
name, press OK.
Do one of the following:
[] Enter the new fax or telephone
number (up to 20 digits).
Press OK.
[] If you do not want to change the
number, press OK.
Do one of the following:
[] Enter the second new fax or
telephone number (up to 20 digits).
Press OK.
[] If you do not want to change the
number, press OK.
Press Stop/Exit.
67
To Next Page
Loading...
Need help?
General
